Glass-like carbon coated GLASTIX KOTE™
GLASTIX KOTE™
GLASTIX KOTE™ Cross-section (Grade:GP2B)
GLASTIX KOTE™ is a material impregnated or coated with glass-like carbon on a graphite or neighboring surface.
It enables use of various Toyo Tanso graphite materials as a substrate, and it does not lose its substrate properties.
Not only does this material offer enhanced durability against scratching and other friction, it also reduces the generation of dust.
Features
- Able to use various Toyo Tanso graphite materials as a substrate.
- Does not lose graphite substrate properties.
- Able to reduce the generation of graphite powder.
- Enhanced durability against scratching and other friction.
Application
- Parts for silicon single crystal pulling devices
- Parts for epitaxial growth
- Dies for continuous casting
- Glass sealing jigs
Properties/Test Data
General Physical Properties
* Example of physical properties when using ISEM-3 as a graphite substrate and applying GLASTIX KOTE™ GP series processing.
(Rate of change with measured value of ISEM-3 substrate as the standard)
Test piece dimensions:
10x10x60 mm: Bulk density, hardness, electrical resistivity, flexural strength
10x10x10 mm: Compressive strength
Dust Reduction Effect
GLASTIX KOTE™ processing can greatly reduce the amount of carbon dust generated.
* This is the result of measuring the number of fine particles in the cleaning solution.
Scratch Strength Comparison
The durability against scratching with GLASTIX KOTE™ processing nearly doubled, and a similar improvement in wear resistance can be expected.
* Critical load indicates the vertical load when the surface begins to show damage.